Видео

Hi, currently it is not possible to add plumbing to Sketch Plan or P2P Measure.

Hello Ameer, please click on the following link for the English version of the video: ruclips.net/video/7S4R_wo5g90/видео.html We hope you have a pleasant day, your Leica Geosystems team.

Thank you for your comment. Tilt compensation is turned off when tilt initialization is lost. There could be many reasons for losing tilt initialization, but not moving the receiver does not necessarily mean switching off tilt compensation automatically. We hope this helps, your Leica Geosystems team.

@@LeicaGeosystemsCH а не могли бы Вы тогда более подробно об этом рассказать? Почему во время RTK съёмки если перестать двигать приёмником, то часто отключается компенсатор наклона? Что можно сделать, чтобы он не отключался?

Hi, during the filming we were using this Samsung tablet: Samsung Galaxy Tab Active Pro.

Hi @klemenbreitfuss7682, Thank you for your valuable feedback. We are always looking to improve our product and will consider your suggestions for future releases. If you have any other questions or need further assistance, please let us know.

Hi, please follow the link below where you will find all the manuals and instructions for the DISTO Plan app and its functions. There is no upper limit to the total number of secure points when performing a relocation. Please let us know if this has helped. shop.leica-geosystems.com/global/measurement-tools/disto/leica-disto-plan-app#tutorials

@Topomarket, the relocation can be carried out with any 3 secure points. Assuming you have 6 secure points, you can target any of these 6 points for the relocation and thus combine the secure points of the first and second relocation. It is also possible to use the same group of secure points for multiple relocations.

@@LeicaGeosystemsCH thanks for your prompt reply. that clears thing up. so, it is not possible to do "unlimited" relocations combining each room with the previous one. it should always be combined with the firts station/room, right?

@@Topomarket there is no limit on number of relocations you can perform. At the same time, you can relocate your set-up independently on the first room. If you want to measure the rooms one after the other, you can of course do so.

thanks again. I will try so and if I have questions I will come bank.

Dear Customer, as far as the accuracy is concerned, both devices achieve the same 1.0 mm accuracy (depending on the conditions). The similar accuracy is also achieved when using the P2P measurements. In this regard, both devices are comparable. DISTO X6 has the advantage when it comes to the storage (1 000 DFX points instead of 30), functions (brand new Point-to-Line function) and the operability (faster star-up time etc.).

Dear Customer, thank you for your valuable feedback. We will share your suggestions with our development team for consideration and potential implementation of the proposed features.

Thank you for contacting Leica Geosystems. Please visit our website and locate a dealer in your region who can provide you with purchasing information: leica-geosystems.com/contact-us/sales_support/sales.

There are two ways to switch on/off the pointfinder: Option 1: Press and hold the zoom key (upper arrow key) for 2 seconds to switch the pointfinder on/off. Option 2: Go to the Settings and go the the page three by moving right in the menu to find the Pointfinder option and turn it on/off by pressing ON/DIST or equal button.

It is possible to create floor plans with multiple rooms with the Relocation feature that allows you to move from one location to another and create the entire floor plan of the apartment. Please follow the link below for our How-to-Video, where we show how to perform Relocation: ruclips.net/video/fNz-gsa3Sds/видео.html Under this link you will find our tutorials for all the functions in the DISTO Plan App. For your use case, it would be best to use Measure Plan or Measure 3D. shop.leica-geosystems.com/global/measurement-tools/disto/leica-disto-plan-app#tutorials Please note that Measure Plan or Measure 3D are only compatible with DISTO S910, DISTO X3/X4 on DST 360 adapter and DISTO X6 on DST 360-X adapter.

@@LeicaGeosystemsCH 90% of my drawings will be 2d also just birds eye floor plans

@@Paddy_Halifax For this application, it is best to use the Measure Plan, as this enables the creation of precise floor plans. It is also possible to export the drawings in PDF Pro format with detailed information or in DWG/DXF format for CAD programs.

We are sorry but this is currently not possible for the DISTO X6.

@@LeicaGeosystemsCH is it available on other Distos ?

@@orlandopisani5677 We regret to inform you that this capability is not currently available for any DISTO device. However, please rest assured that your feedback is highly valued. Although we may not have an immediate solution, your suggestions have been duly noted.

There is an option to export measurements in 2D+Height format, i.e. a 2D plane extended by a certain height. The exported file then looks like a 3D model, but since it is only an extended version of a flat plane, we have decided to call this export 2D+Height.

Dear Customer, we are sorry to hear about your disappointment with the Leica Disto Plan. We understand your frustration with the 20-point limit on the Smart Room function. Our aim was to design this function so that it would meet the needs of the majority of users, but we recognize that every project is unique and may require more points. For cases where more points need to be measured, it would be necessary to use one of the P2P Measure features, in this case Measure Plan. With Measure Plan, you have the flexibility to create floor plans with an unlimited number of points, catering to the demands of your specific projects. To unlock additional capabilities of P2P feature for more comprehensive measurements, it is necessary to purchase the DST 360 adapter. This adapter enhances the functionality of the Disto X4, thanks to its built-in encoders and sensors. We appreciate your feedback and thank you for your understanding.

@@LeicaGeosystemsCH I have a Leica s910 with FTA 360, my intention in buying the X4 was the speed to create floor plans. The S910 is slow compared to the X4 and doesn't need to keep moving the tripod.

@@geissonwillamsdasilva DISTO X4 and S910 offer the same app functionality, i.e. all P2P measurement functions are also available on the X4. Please note, in order to use P2P measurements with the DISTO X4, it is necessary to also purchase the DST 360 adapter, which enables these measurements thanks to the built-in sensors and encoders. On top of that, with DISTO X4 it is also possible to use Smart Room function. It is also possible to use the Smart Room function with the DISTO X4.